Table of Contents

Pan Knob


Note: Panning is disabled if 3d Mode is enabled.

Dial the Pan Knob to set pan. -500 is pan full left, 0 is centred, 500 pan full right. The value is displayed in the status bar.

Right dial to make finer adjustments.

Double clicking centres the pan.

Note: changes to the Gang are transmitted to all LoopTracks controlled by the Gang. Changes to the master LoopTrack in a blocked Band are transmitted to all LoopTracks in the Band.

Also see: Doing Things with LoopTracks

last modified 10-29-200